Aura Ablation Testing Foil

FOIL

New

Aluminium Foil for testing Ultrasonic Cleaners

More details

59 Items

In Stock

By buying this product you can collect up to 21 loyalty points. Your cart will total 21 points that can be converted into a voucher of £ 0.21.


Prices
£ 21.86
Inc.VAT
£ 18.22
Exc.VAT

Description

Ultrasonic activity test or Foil Ablation as described in HTM01-05
The ultrasonic activity can be investigated by the
erosion pattern created on aluminium foil exposed in the tank for a
short period. This activity may not be uniform throughout the
tank. Validation tests will determine the pattern variation at
defined positions and the time required to produce this pattern.
A roll of test foil to the specification recommended by HTM01-05 is available (Width 20mm thickness 0.018mm and the Reel length is 50m
The following equipment will
be required:
1.Aluminium foil provided for ultrasonic cleaner testing
2.Adhesive tape (for example autoclave indicator tape or masking tape)
3. Aura Ultrasonic Grid

Method
The following method should be used:
1. Cut strips of aluminium foil in lengths 120 mm longer than
the bath is deep. Roll up one end of the foil so that the foil is now as long as the bath is deep.
2. Feed through Aura Ultrasonic Grid, fix with tape
3. Place over the cleaner ensuring all the strips are within the cleaner tank
4. Run the unit for 1-2minutes
5. Remove the grid and examine the foil
6. Record the results in the supplied log book

Reviews

No customer comments for the moment.

Write a review

Aura Ablation Testing Foil

Aura Ablation Testing Foil

Aluminium Foil for testing Ultrasonic Cleaners

Write a review

Products in the same Category

  • Ultrasonic Foil Testing Kit
    Ultrasonic Foil Testing Kit
    Inc.VAT
    Exc.VAT